Tuesday, March 18, 2014
Monday, March 17, 2014
This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the printer. The instructions and procedures included herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page.
This service manual consists of six chapters and Appendix.
CHAPTER 1. PRODUCT DESCRIPTIONS
Provides a general overview and specifications of the product.
CHAPTER 2. OPERATING PRINCIPLES
Describes the theory of electrical and mechanical operations of the product.
CHAPTER 3. TROUBLESHOOTING
Describes the step-by-step procedures for the troubleshooting.
CHAPTER 4. DISASSEMBLY / ASSEMBLY
Describes the step-by-step procedures for disassembling and assembling the product.
CHAPTER 5. ADJUSTMENT
Provides Epson-approved methods for adjustment.
CHAPTER 6. MAINTENANCE
Provides preventive maintenance procedures and the lists of Epson-approved lubricants and adhesivesrequired for servicing the product.
CHAPTER 7. APPENDIX
Provides the following additional information for
• Connector pin assignments
• Electric circuit boards components layout
• Electrical circuit boards schematics
• Exploded diagram & Parts List
Sunday, March 16, 2014
EPSON Stylus Photo 890, 1280, 1290 EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led. Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led. Release all buttons. Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink. In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
Saturday, March 15, 2014
Compatibility and system requirements :
- Windows 8
- Windows 7
- Windows Vista
- Windows XP
- all drivers Support 32bit and 64bit
Download link HP Photosmart 5514 Printer drivers
Thursday, March 13, 2014
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printers carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
Wednesday, March 12, 2014
Monday, March 10, 2014
This is How to Reset Canon Pixma iP 2000 :
Printer Xnu i550 i850 i950
Printer xnu i450
Reset canon i255 i355
Reset canon iP1000
Reset iP1500 canon
manual service canon iP2000 resetter
Download : http://rapidshare.com/files/84970258/resetprint.zip